Welcome to Firefly
Switch language
Firefly Docsss
Last Updated: 2026-07-31 10:28:07

Introduction

Product introduction

CAM-8MS1M CAM-8MS1M 1/2.7”industrial-grade HD WDR sensor 100dB WDR, suitable for various complex light environments.MIPI standard interface, supports 7x24h operating.

Shipping list

Detailed parameters

Parameters
SensorSC8238
CMOS Sensor1/2.7 sensor/RGB
ISPbuilt in XC7160
Max Resolution3840(H) x 2160(V) (16
mode)
Sensor Pixel Size1.5um x 1.5um
Low Lux≤0.3Lux/F2.4
Image Transmission Rate4K/25fps
SNR36dB
WDR>100DB
Distortionless LensM8 x 0.25 lens/650NM filter
FOVH: 84°V: 50°
ApertureF2.0
Focal Length4.3mm
DistortionTV Distortion<1%
Lens CRA. <19.4°
Lens Temperature Range-20° /+65°
Video Output FormatYUV/MJPG
IRNC
Power Supply5V,Ripple not higher than 80mv.
Connection Way0.5mm FPC
(CAM-8MS1M is 30pins, Board needs to be based on the hardware interface)
Power Consumption5V/ 270MA+10%
Operating Temperature-10° C ~ +55° C (Humidity : 10%RH ~ 75%RH)
Storage Temperature-20° C~ +65° C (Humidity : 10%RH ~75%RH)

Usage

Hardware connection

The Firefly development board has two MIPI CSI interfaces, one is a 30pin interface and the other is a 24pin interface. When connecting, please pay attention to the direction and connect only to the corresponding pin number interface.Here is a unified interface diagram:

30pin MIPI CSI Interface Connection

324pin MIPI CSI Interface Connection

Note: Do not connect to an interface with the words MIPI DSI as this may cause damage to the module or development board.

Firmware and Resource download

Related documents and firmware download, see the official website Resource Download

Tutorial

Flash firmware

Compile the firmware

RK3399 platform

RK3399Pro platform

RK3566 platform

RK3568 platform

RK3588 platform

RK3576 platform

On this page