Quick Start
New to CSA1-N8? Jump directly to a task, or switch to "First Time Setup" for the 9-step flow. This page is only an entry point; details are on the linked pages.
Read before power-on: safety
Never plug or unplug power cables while the device is live; wait at least 30 seconds after power-off before powering on again. Power-on behavior varies by model; read the matching Power Operations page first.
Installation and Power-On
Rack installation, power safety, and status checks.
Network and Login
BMC IP, sub-board network, and Web / SSH / serial login.
aBMC Features
Users, alerts, storage, power policy, and other management features.
Application Cases
Single NIC with multiple subnets, network isolation, and network sharing.
Firmware and Customization
BMC upgrade, custom firmware, and recovery; see "Get the SDK and System Support" for the SDK and system support list.
Maintenance and Troubleshooting
Log collection, troubleshooting, and sub-board disconnection handling.
| Prepare | Connect | Operate | Deliver |
|---|---|---|---|
| 1–4 | 5–6 | 7–8 | 9 |
Prepare · Confirm Specifications and Support
Confirm the node count, interfaces, power consumption, and the operating systems and sub-board models supported by this model.
Unbox and Check Accessories
Check power cords, rails / brackets, SFP modules, and serial cables. The actual accessory list depends on the model.
Power-On Safety
Confirm the power supply, grounding, and power-on sequence. Never plug or unplug power cables while the device is live; wait at least 30 seconds after power-off before powering on again.
Power On, Boot, and Check Status
Connect power and check the node / system indicators and BMC indicators to confirm that the device is manageable.
Connect · Network Wiring and BMC Access
Connect the management network according to the site plan, then access the BMC through its default IP or DHCP address and complete the first login.
Configure aBMC Network and Sub-Boards
After logging in, change the BMC IP / VLAN, confirm that the management network matches the site plan, and then log in to the sub-boards.
Operate · aBMC Features and Solutions
Configure users, alerts, storage, power policy, and other common features, and choose a network solution based on the site requirements.
SDK, Firmware, and Customization
Check the system support list and get the SDK on the "Get the SDK and System Support" page. Upgrade the BMC or customize the firmware as needed.
Deliver · On-Site Deployment and Rack Installation
Complete rack installation, cabling, and power-on. Customers deploy their own business software and define their own acceptance criteria.