Welcome to Firefly
English
Firefly Docsss
Last Updated: 2026-11-18 14:24:01

Upgrade Firmware via SD Card

This document describes how to upgrade the firmware on the Firefly-R3572A motherboard via a MicroSD card.

To upgrade firmware with a MicroSD card (a card of 32 GB or less is recommended), you need to write the unified firmware to the card with a card-creation tool on a PC. This operation is currently supported on Windows only.

Preparation

  • Motherboard
  • PC (Windows operating system)
  • SD card (MicroSD)
  • USB card reader
  • Unified firmware update.img

Steps

  • Download the unified firmware to be flashed to the motherboard.
  • Open SD_Firmware_Tool, check the Firmware Upgrade box, and click Select Firmware to choose the correct firmware.
  • Insert the MicroSD card into the USB card reader, plug it into a USB port on the PC, and select the correct USB device in the combo box.
  • Click Start Creation and wait until it finishes.
  • Remove the MicroSD card, insert it into the motherboard's MicroSD slot, and power on the board. The board starts upgrading automatically.
  • After the upgrade completes, remove the MicroSD card and the board reboots automatically, completing the whole upgrade process.

For other flashing methods, refer to Upgrade Firmware via USB Cable.

On this page